Helical Hydraulic Rotary Actuator 180/360 Degree Rotation WL10 Series
Why Choose Us
WEITIA mobile hydraulic rotary actuators offer simple and cost-effective solutions to move, support and position rotating loads in countless applications. The actuators are designed to replace multiple components and function as a rotating device, mounting bracket and bearing, all-in-one. They feature tremendous torque output and exceptional load bearing capability in compact dimensions.
Features
Technical Specification
| Rotation | 180° |
| Output Mode | Front Flange |
| Mounting | Foot |
| Drive Torque Nm@21Mpa | 900 |
| Holding Torque Nm@21Mpa | 2400 |
| Max Straddle Moment Capacity Nm | 4500 |
| Max Cantilever Moment Capacity Nm | 2480 |
| Radial Capacity Kg | 2130 |
| Axial Capacity Kg | 680 |
| Displacement 180° cc | 234 |
| Weight 180° Kg | 17 |
Performance
Torque Versus Hydraulic Pressure and Loads
The driving torque and holding torque are approximately linear with hydraulic pressure. As moment loads increase, drive torque may be reduced by up to 15%.
Mounting Dimensions
| D1 Mounting Flange Dia mm |
117 |
| D2 Housing Dia mm |
114 |
| F1 Mounting Hole Of Shaft Flange mm |
M10×1.5 |
| F2 Qty of Shaft Flange Mounting Holes |
8 |
| F3 Bolt Circle Dia of Shaft Flange mm |
65 |
| F4 Clearnace Hole For Shaft Through Bolt Dia mm |
M24 |
| F5 Mounting Holes Of Housing Foot |
M20 |
| F6 Shaft Center Hole mm |
- |
| F7 Mounting Hole Of Endcap Flange mm |
- |
| F8 Qty of Endcap Flange Mounting Hole |
- |
| F9 Bolt Circle Diameter of Endcap Flange |
- |
| H1 Height Without Counterbalance Valve mm |
135 |
| H2 Height To Centerline mm |
76.2 |
| H3 Foot Height mm |
38.1 |
| H4 Overall Height mm |
163 |
| L1 Overall Length mm |
216 |
| L2 Length Without Rotating Flange mm |
197 |
| L3 Shaft Flange To Counterbalance Valve mm |
34.5 |
| L4 Mounting Length mm |
140 |
| L5 Shaft Flange To Mounting Hole mm |
37.6 |
| W1 Mounting Width mm |
152 |
| W2 Overall Width mm |
191 |
| P1, P2 Port | ISO-1179-1/BSPP ‘G’ series, size 1/8 ~1/4. See drawing for details. |
| V1, V2 Port | ISO-11926/SAE series, size 7/16. See drawing for details. |
*Specification charts are for general reference only, please consult drawing for actual values and tolerances.
Valves Option
The counterbalance valve protects rotation in the event of a hydraulic line failure and protect the actuator against excessive torque loading.
Hydraulic Schematic of Optional Counterbalance Valve
The counterbalance valve is optional on-demand. SUN brands or other top brands are available for different requests.
Manufactured from aluminum, the valve blocks are bolted to a flat mounting pad on the actuator housing. Three bolts secure the valve block to the actuator. See specification pages for valve location.
The pilot ratio is 3:1. The valves are set to relieve at 3300 psi ± 300 psi (228 bar ±21 bar).
Mounting Type
Application
Steering, Boom positioning, Drill positioning, Platform/basket/jib rotation, Conveyor positioning, Davit rotation, Mast/hatch positioning, Access ramp deploy, Attachment rotation, Shotcrete nozzle rotation, Pipe handling, Brush positioning, etc.
